Bluesberry · holding page
Reels in build order. The reveal is in the video block above.
Reels
R1
The wood, the body, and the inside profile of the cover plate — before the vents
R2
Cutting the 30s-style circular vents through top and back, stacked — part 1
R3
Cutting the vents, stacked — part 2
R4
Cutting the vents, stacked — part 3
R5
Resawing the headpiece stock
R6
Neck tenon on the LMI jig
R7
The neck tenon, in stills
R8
The fret slot fixture, and the fingerboard with the slots freshly cut
Images
I1 The body, showing the bottom curve and the rough-cut top
I2 The body, showing the bottom curve and the rough-cut top
I3 The assembled body with the vented cover plate
I4 The assembled body with the vented cover plate
I5 The assembled body with the vented cover plate
I6 Cutting the neck mortise on the LMI jig
I7 Cutting the neck mortise on the LMI jig
I8 Carving the neck tenon
I9 Carving the neck tenon
I10 Fingerboard and headpiece, before the logo inlay
I11 Looking straight through the back-lit body, top vents to bottom vents
